FRONT UPPER SUSPENSION ARM INSPECTION


  1. INSPECT FRONT SUSPENSION UPPER ARM ASSEMBLY LH

    A01J4WFE01

    1. As shown in the illustration, move the ball joint stud back and forth 5 times before installing the nut.

    2. Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the fifth turn.

      Torque:
      Standard turning torque
      0.98 to 4.5 N*m  { 10 to 46 kgf*cm, 9 to 40 ft.*lbf, or less }

    3. Check for any cracks and grease leaks on the ball joint dust cover.