FRONT UPPER SUSPENSION ARM DISASSEMBLY


  1. REMOVE FRONT UPPER ARM BUSH

    A01J3MKE01

    1. Using a hammer and chisel, strike and bend the entire flange of the bush as shown in the illustration.

    2. A01J345E01

      Using SST and a press, press out the upper arm bush.

      SST
      09613-26010
      09710-22021   ( 09710-01041 )
      09950-00020

  2. REMOVE UPPER BALL JOINT DUST COVER


    1. Remove the dust cover set ring and dust cover from the upper arm.

      Note


      • Do not damage the ball joint dust cover.

      • If the ball joint dust cover is damaged, replace it.

  3. REMOVE FRONT UPPER BALL JOINT


    1. A01J370

      Using a snap ring expander, remove the snap ring.

    2. A01J3SNE01

      Using SST and a press, press out the upper ball joint.

      SST
      09612-30012
      09388-40010