FRONT SHOCK ABSORBER REMOVAL


  1. REMOVE FRONT WHEEL

  2. DISCONNECT FRONT STABILIZER LINK ASSEMBLY LH

    A01J5FRE01

    1. Remove the nut and disconnect the stabilizer link from the steering knuckle.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.

  3. DISCONNECT FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  4. REMOVE FRONT STABILIZER BRACKET


    1. Remove the front stabilizer bracket Click here.

  5. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar Click here.

  6. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING

    A01J783E01

    1. Remove the nut and bolt.

      Tech Tips

      While fixing the nut in place, loosen and remove the bolt.

    2. A01J5N9E01

      Remove the 3 nuts and shock absorber with coil spring.