REAR AXLE SHAFT ON-VEHICLE INSPECTION


  1. CHECK REAR AXLE SHAFT BEARING

    A01J3FPE01

    1. Remove the rear wheel.

    2. Remove the brake drum.

    3. Inspect the axle shaft backlash.


      1. Using a dial indicator, check the backlash near the center of the axle shaft.

        Maximum
        0.5 mm (0.0197 in.)

        If the backlash is greater than the maximum, replace the bearing.

    4. A01J3ZJE01

      Inspect the axle shaft deviation.


      1. Using a dial indicator, check the deviation at the surface of the axle shaft.

        Maximum
        0.1 mm (0.0039 in.)

        If the deviation is greater than the maximum, replace the bearing.