FRONT UPPER SUSPENSION ARM REASSEMBLY


  1. INSTALL FRONT UPPER BALL JOINT


    1. A01J5O3E01

      Using SST and a press in a new upper ball joint.

      SST
      09612-30012
      09223-00010

    2. Using a snap ring expander, install a new snap ring.

      Note

      Make sure the snap ring is securely installed in the groove.

  2. INSTALL UPPER BALL JOINT DUST COVER


    1. A01J5H1E03

      Pack the upper arm ball joint with MP grease No. 2.

      Grease capacity
      8.0 g (0.282 oz.)

    2. Apply MP grease No. 2 to the locations shown in the illustration.

      Note

      Do not apply MP grease No. 2 to the tapered or threaded parts of the ball joint.

    3. Install a new dust cover to the upper arm.

    4. Install a new dust cover set ring.

  3. INSTALL FRONT UPPER ARM BUSH

    A01J59RE01

    1. Using SST and a press, press in a new upper arm bush.

      SST
      09710-30021   ( 09710-03101 )