FRONT PROPELLER SHAFT ASSEMBLY REMOVAL


  1. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

    A01J3MDE01

    1. Place matchmarks on the propeller shaft flange and differential.

    2. Remove the 4 nuts, 4 bolts and 4 washers, and disconnect the propeller shaft.

    3. A01J6C5E01

      Place matchmarks on the propeller shaft flange and transfer flange.

    4. Remove the 4 nuts, 4 washers and front propeller shaft.

  2. INSPECT FRONT PROPELLER SHAFT ASSEMBLY

    A01J4GLE01

    1. Using a dial indicator, measure the propeller shaft runout.

      Maximum runout
      0.30 mm (0.0118 in.)

      If the runout is greater than the maximum, replace the propeller shaft.

  3. INSPECT UNIVERSAL JOINT SPIDER ASSEMBLY


    1. Check the spider bearings for wear or damage.

    2. Check each spider bearing's axial play by turning the yoke while holding the shaft tightly.

      Maximum bearing axial play
      0.05 mm (0.00197 in.)

      If the axial play is greater than the maximum, replace the spider bearing.