PROPELLER SHAFT ASSEMBLY REMOVAL


  1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY (for Pre-Runner)


    1. A01J3AME02

      Place matchmarks on the propeller shaft flange and differential flange.

    2. Remove the 4 nuts, 4 bolts and 4 washers, and disconnect the propeller shaft.

    3. A01J7J6E01

      Remove the 2 bolts and 2 plates from the frame crossmember.

    4. Pull out the propeller shaft.

    5. A01J65JE05

      Install SST to the extension housing to prevent oil leakage.

      SST
      09325-40010

  2. REMOVE REAR PROPELLER SHAFT ASSEMBLY (for 4WD)


    1. A01J4VEE01

      Place matchmarks on the propeller shaft flange and transfer flange.

    2. Remove the 4 nuts and 4 washers, and disconnect the propeller shaft.

    3. A01J7E1E01

      Place matchmarks on the propeller shaft flange and differential flange.

    4. Remove the 4 nuts, 4 bolts and 4 washers.

    5. Remove the propeller shaft.