TRANSFER ASSEMBLY INSTALLATION


  1. INSTALL TRANSFER ASSEMBLY


    1. Install the transfer to the transmission.

    2. Install the 2 clamps and 8 bolts.

      Torque:
      24 N*m  { 244 kgf*cm, 17 ft.*lbf }

  2. INSTALL MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)

    Click here

  3. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)


    1. A343F: Click here

    2. A750F: Click here

  4. INSTALL LOWER TRANSFER CASE PROTECTOR

  5. ADD TRANSFER OIL


    1. Remove the case plug (for filler) and gasket.

    2. Pour oil so that the oil level is between 0 to 5.0 mm (0 to 0.197 in.) from the bottom lip of the case plug (for filler) hole.

      Note


      • When adding oil, pour it slowly.

      • Add oil a little at a time, waiting several minutes between each addition of oil.

    3. Wait approximately 5 minutes and check that the oil level has not changed.

    4. Install a new gasket and the case plug (for filler).

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }