COUNTER GEAR INSTALLATION


  1. INSTALL COUNTER GEAR FRONT BEARING

    A01J4VXE01

    1. Using SST and a press, press in a new front bearing to the counter gear.

      SST
      09515-10010

      Note

      Install it so that the snap ring groove of the bearing faces to the front side.

  2. INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING


    1. Select a snap ring that makes the clearance between the counter gear and snap ring to be within the specification.

      Standard clearance
      0.10 mm (0.00393 in.) or less
      Thickness
      2.05 to 2.10 mm (0.0807 to 0.0827 in.)
      2.10 to 2.15 mm (0.0827 to 0.0846 in.)
      2.15 to 2.20 mm (0.0846 to 0.0866 in.)
      2.20 to 2.25 mm (0.0866 to 0.0886 in.)
      2.25 to 2.30 mm (0.0886 to 0.0906 in.)
      2.30 to 2.35 mm (0.0906 to 0.0925 in.)
    2. A01J7DWE02

      Using a snap ring expander, install the snap ring.