SECOND BRAKE INSPECTION


  1. INSPECT 2ND BRAKE PISTON

    A01J4U1E01

    1. Make sure the 2nd brake piston moves smoothly when applying and releasing low-pressure compressed air to the 2nd brake drum.

  2. INSPECT 2ND BRAKE CLUTCH DISC

    A01J6Z1E01

    1. Replace all discs if one of the following problems is present: 1) a disc, plate or flange is worn or burnt, 2) the lining of a disc is peeled off or discolored, or 3) grooves or printed numbers have even a little bit of damage.

      Note

      Before assembling new discs, soak them in ATF for at least 15 minutes.

  3. INSPECT 2ND BRAKE PISTON RETURN SPRING

    A01J5UPE01

    1. Using a vernier caliper, measure the free length of the spring together with the spring seat.

      Standard free length
      16.05 mm (0.6319 in.)

      If the length is not as specified, replace the spring.