PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

  3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A01J3IKE01

    1. Using a screwdriver, pry out the lock washer.

    2. Remove the lock nut and lock washer.

    3. Remove the bolt and park/neutral position switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.