FLOOR SHIFT ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    A01J76G

    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

  3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

    A01J5QV

    1. Detach the 4 claws and remove the parking brake hole cover.

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Detach the 12 claws and remove the upper console panel.

      Note

      Be careful not to damage the instrument panel and console box with the claws of the upper console panel.

      A01J6F0E01
      Text in Illustration
      *A for 2WD *B for 4WD

  5. REMOVE CONSOLE BOX ASSEMBLY

    A01J4XBE01
    Text in Illustration
    *1 Screw
    *2 Bolt
    *3 Clip

    1. Remove the 4 screws and 2 bolts.

    2. Using a clip remover, remove the 2 clips and console box.

  6. REMOVE FLOOR SHIFT ASSEMBLY

    A01J72SE02

    1. Disconnect the 2 connectors and clamp.

    2. Move the shift lever to L.

    3. Disconnect the transmission control cable.

    4. A01J69PE01

      Remove the 4 bolts.

    5. Remove the floor shift.