PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01J7KT

      Remove the 2 bolts and heat insulator.

    2. Disconnect the switch connector.

    3. A01J55ZE02

      Using a screwdriver, pry out the lock washer.

    4. Remove the lock nut and lock washer.

    5. Remove the bolt and park/neutral position switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.