SUN GEAR AND ONE-WAY CLUTCH INSPECTION


  1. INSPECT ONE-WAY CLUTCH ASSEMBLY

    A01J4RBE01

    1. Hold the planetary sun gear, and turn the one-way clutch assembly. Check that the one-way clutch hub can be turned freely clockwise and locks when turned counterclockwise.

  2. INSPECT PLANETARY SUN GEAR

    A01J4ONE01

    1. Using a dial indicator, measure the inside diameter of the planetary sun gear bushes.

      Maximum inside diameter
      27.08 mm (1.0661 in.)

      If the inside diameter is greater than the maximum, replace the planetary sun gear.