If a DTC is displayed during the DTC check, check the circuit listed in the table below and proceed to the page given.
Tech Tips
*1: "Comes on" means that the MIL will illuminate.
*2: "DTC stored" means that the ECM memorizes the malfunction code if the DTC detection condition(s) are met.
*3: w/ Secondary Air Injection System
*4: w/o Secondary Air Injection System
These DTCs may be output when the clutch, brake, gear components, etc. inside the automatic transmission are damaged.
| DTC Code | Detection Item | MIL*1 | Memory*2 | See page |
|---|---|---|---|---|
| P0705 | Transmission Range Sensor Circuit Malfunction (PRNDL Input) | Comes on | DTC stored | |
| P0710/38 | Transmission Fluid Temperature Sensor "A" Circuit | Comes on | DTC stored | |
| P0712/38 | Transmission Fluid Temperature Sensor "A" Circuit Low Input | Comes on | DTC stored | |
| P0713/38 | Transmission Fluid Temperature Sensor "A" Circuit High Input | Comes on | DTC stored | |
| P0717/67 | Input Speed Sensor Circuit No Signal | Comes on | DTC stored | |
| P0722/61 | Output Speed Sensor Circuit No Signal | Comes on | DTC stored | |
| P0818 | Driveline Disconnect Switch Input Circuit | Comes on | DTC stored | |
| P0973/62 | Shift Solenoid "A" Control Circuit Low (Shift Solenoid Valve S1) | Comes on | DTC stored | |
| P0974/62 | Shift Solenoid "A" Control Circuit High (Shift Solenoid Valve S1) | Comes on | DTC stored | |
| P0976/63 | Shift Solenoid "B" Control Circuit Low (Shift Solenoid Valve S2) | Comes on | DTC stored | |
| P0977/63 | Shift Solenoid "B" Control Circuit High (Shift Solenoid Valve S2) | Comes on | DTC stored | |
| P2716/77 | Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT) | Comes on*3 -*4 |
DTC stored | |
| P2769/64 | Short in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) | Comes on*3 -*4 |
DTC stored | |
| P2770/64 | Open in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) | Comes on*3 -*4 |
DTC stored |