REAR PLANETARY GEAR DISASSEMBLY


  1. REMOVE OUTPUT SHAFT

    A01J6KGE01

  2. REMOVE PLANETARY OUTPUT SHAFT OIL SEAL RING

    A01J33VE01

  3. REMOVE REAR PLANETARY RING GEAR

    A01J4KJE01

  4. INSPECT NO. 2 ONE-WAY CLUTCH

    A01J4O6E03

    1. Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locks when turned clockwise.

  5. REMOVE NO. 2 ONE-WAY CLUTCH

    A01J3BIE01

    1. Remove the inner race from the planetary gear.

    2. A01J3JXE01

      Using a screwdriver, pry out the snap ring.

    3. A01J75SE01

      Remove the one-way clutch with the retainers from the planetary gear.

  6. REMOVE NO. 2 PLANETARY CARRIER THRUST WASHER

    A01J6U4E01

  7. REMOVE NO. 1 PLANETARY CARRIER THRUST WASHER

    A01J6NDE01

  8. REMOVE REAR PLANETARY FLANGE THRUST NEEDLE ROLLER BEARING

    A01J71FE01

    1. Remove the 2 races and bearing from the planetary ring gear.

  9. REMOVE REAR PLANETARY RING GEAR FLANGE

    A01J5OTE01

    1. Using a screwdriver, pry out the snap ring.

    2. A01J4HOE01

      Remove the ring gear flange.

  10. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE

    A01J48QE01

    1. Using a feeler gauge, measure the thrust clearance.

      Standard clearance
      0.20 to 0.60 mm (0.0079 to 0.0236 in.)
      Maximum clearance
      0.65 mm (0.0256 in.)

      If the clearance is greater than the maximum, replace the planetary gear.