PARK / NEUTRAL POSITION SWITCH ADJUSTMENT


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01J7KT

      Remove the 2 bolts and heat insulator.

    2. Loosen the park/neutral position switch bolt and move the shift lever to N.

    3. A01J592E02

      Align the switch groove with the neutral basic line.

    4. Hold the switch in position and tighten the bolt.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

    5. After adjustment, perform the inspection Click here.

    6. Install the heat insulator with the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }