IGNITION SWITCH INSTALLATION


  1. INSTALL IGNITION SWITCH ASSEMBLY


    1. A01J36NE04

      Install the switch to the steering column bracket upper with the 2 claws.

  2. CONNECT CONNECTOR


    1. A01J7JFE01

      Connect the 9 connectors shown in the illustration.

    2. Secure the wire harness with the clamps.

  3. INSTALL STEERING COLUMN COVER LOWER


    1. A01J6JZE02

      Install the cover lower with the 3 screws.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to install the 3 screws and cover lower.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.