IGNITION SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.

  2. REMOVE STEERING COLUMN COVER LOWER


    1. A01J6JZE02

      Remove the 3 screws and cover lower.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to remove the 3 screws and cover lower.

  3. DISCONNECT CONNECTOR


    1. A01J7JFE01

      Disconnect the 9 connectors and wire harness clamps from the steering column.

  4. REMOVE IGNITION SWITCH ASSEMBLY


    1. A01J36NE04

      Detach the 2 claws and remove the switch from the steering column bracket upper.