STARTER (for 1.4 kW Type) DISASSEMBLY


  1. REMOVE STARTER YOKE ASSEMBLY

    A01J64T

    1. Remove the nut and disconnect the lead wire from terminal C.

    2. Remove the 2 through bolts.

    3. Pull out the starter yoke together with the armature.

    4. Remove the O-ring from the starter yoke.

  2. REMOVE STARTER CLUTCH SUB-ASSEMBLY


    1. A01J6BR

      Remove the 2 screws and magnet starter switch assembly.

    2. A01J4GPE01

      Remove the idler gear, clutch roller, retainer and starter clutch sub-assembly from the starter drive housing.

    3. Remove the return spring.

    4. A01J5L0E02

      Using a magnet hand, remove the steel ball from the clutch shaft hole.

  3. REMOVE STARTER BRUSH HOLDER ASSEMBLY


    1. A01J4VP

      Remove the 2 screws and commutator end frame from the starter yoke.

    2. Remove the O-ring from the starter yoke.

    3. Disconnect the 4 starter yoke brushes from the starter brush holder.


      1. A01J4RZ

        Using a screwdriver, pull back the spring.

      2. Disconnect the brush from the starter brush holder.

    4. Remove the starter brush holder from the starter yoke.

  4. REMOVE STARTER ARMATURE ASSEMBLY


    1. Remove the starter armature from the starter yoke.