AUTOMATIC TRANSMISSION SYSTEM TERMINALS OF ECM

A01J61YE07

Tech Tips

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.

Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
NSW (E8-30) - E1 (E11-3) L-Y - BR Park/neutral position switch signal Ignition switch ON and shift lever on P or N Below 3 V
NSW (E8-30) - E1 (E11-3) L-Y - BR Park/neutral position switch signal Ignition switch ON and shift lever not on P or N 9 to 14 V
STA (E8-12) - E1 (E11-3) B-Y - BR Starter signal Cranking 6 V or more
R (E9 -11) - E1 (E11-3) R-Y - BR R shift position switch signal Ignition switch ON and transfer shift lever on R 7.5 to 14 V
R (E9 -11) - E1 (E11-3) R-Y - BR R shift position switch signal Ignition switch ON and transfer shift lever not on R Below 1.5 V
L (E9-9) - E1 (E11-3) G-R - BR L shift position switch signal Ignition switch ON and transfer shift lever on L 7.5 to 14 V
L (E9-9) - E1 (E11-3) G-R - BR L shift position switch signal Ignition switch ON and transfer shift lever not on L Below 1.5 V
2 (E9-10) - E1 (E11-3) L - BR 2 shift position switch signal Ignition switch ON and transfer shift lever on 2 7.5 to 14 V
2 (E9-10) - E1 (E11-3) L - BR 2 shift position switch signal Ignition switch ON and transfer shift lever not on 2 Below 1.5 V
3 (E9-19) - E1 (E11-3) G-O - BR 3 shift position switch signal Ignition switch ON and transfer shift lever on 3 7.5 to 14 V
3 (E9-19) - E1 (E11-3) G-O - BR 3 shift position switch signal Ignition switch ON and transfer shift lever not on 3 Below 1.5 V
NC0+ (E10-34) - NC0- (E10-26) V - P Speed sensor (NC0) signal Engine is idling

Pulse generation

(see waveform 1)

SP2+ (E10-35) - SP2- (E10-27) G - R Speed sensor (SP2) signal Vehicle speed 20 km/h (12 mph)

Pulse generation

(see waveform 2)

STP (E9-4) - E1 (E11-3) G-W - BR Stop light switch signal Ignition switch ON and brake pedal is depressed 7.5 to 14 V
STP (E9-4) - E1 (E11-3) G-W - BR Stop light switch signal Ignition switch ON and brake pedal is released Below 1.5 V
S1 (E10-9) - E1 (E11-3) B-W - BR S1 solenoid signal Ignition switch ON 9 to 14 V
S1 (E10-9) - E1 (E11-3) B-W - BR S1 solenoid signal 1st or 2nd gear 9 to 14 V
S1 (E10-9) - E1 (E11-3) B-W - BR S1 solenoid signal 3rd or 4th gear Below 1.5 V
S2 (E10-8) - E1 (E11-3) B-R - BR S2 solenoid signal Ignition switch ON Below 1.5 V
S2 (E10-8) - E1 (E11-3) B-R - BR S2 solenoid signal 2nd or 3rd gear 9 to 14 V
S2 (E10-8) - E1 (E11-3) B-R - BR S2 solenoid signal 1st or 4th gear Below 1.5 V
SL (E10-11) - E1 (E11-3) L-Y - BR SL solenoid signal Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)

Pulse generation

(see waveform 3)

SL (E10-11) - E1 (E11-3) L-Y - BR SL solenoid signal Vehicle driving under lock-up condition 9 to 14 V
SLT+ (E10-12) - SLT- (E10-13) B-L - B-Y SLT solenoid signal Ignition switch ON Below 3 V
SLT+ (E10-12) - SLT- (E10-13) B-L - B-Y SLT solenoid signal Engine is idling

Pulse generation

(see waveform 4)

SPD (E9-8) - E1 (E11-3) V-R - BR Speed signal Vehicle speed 20 km/h (12 mph)

Pulse generation

(see waveform 5)

THOC (E11-22) - E2 (E11-28) W-L - BR ATF temperature sensor signal ATF temperature: 115°C (239°F) or more Below 1.5 V
SIL (E9-13) - E1 (E11-3) R-Y - BR Terminal SIL of DLC3 Connect intelligent tester to DLC3 Pulse generation
WFSE (E9-35) - E1 (E11-3) W - BR Terminal SIL of DLC3 Ignition switch ON 9 to 14 V

  1. Waveform 1 (Reference)

    A01J6OOE01
    Item Content
    Symbols (Terminal No.) NC0+ (E10-34) - NC0- (E10-26)
    Tool Setting 5 V/DIV., 0.5 msec./DIV.
    Condition Engine is idling
  2. Waveform 2 (Reference)

    A01J7D0E01
    Item Content
    Symbols (Terminal No.) SP2+ (E10-35) - SP2- (E10-27)
    Tool Setting 2 V/DIV., 2 msec./DIV.
    Condition Vehicle speed 20 km/h (12 mph)
  3. Waveform 3 (Reference)

    A01J43XE01
    Item Content
    Symbols (Terminal No.) SL (E10-11) - E1 (E11-3)
    Tool Setting 10 V/DIV., 100 msec./DIV.
    Condition Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
  4. Waveform 4 (Reference)

    A01J4EXE01
    Item Content
    Symbols (Terminal No.) SLT+ (E10-12) - SLT- (E10-13)
    Tool Setting 5 V/DIV., 1 msec./DIV.
    Condition Engine is idling
  5. Waveform 5 (Reference)

    A01J3NTE01
    Item Content
    Symbols (Terminal No.) SPD (E9-8) - E1 (E11-3)
    Tool Setting 5 V/DIV., 20 msec./DIV.
    Condition Vehicle speed 20 km/h (12 mph)