THERMOSTAT REMOVAL

Tech Tips

If the thermostat was not installed, cooling efficiency would be harmed. Even if the engine tends to overheat, do not remove the thermostat.


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. Remove the 4 bolts and under cover.

  2. DRAIN ENGINE COOLANT


    1. Remove the radiator cap.

    2. Loosen the 2 cylinder block drain cock plugs and radiator drain cock plug, and then drain the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

      A01J5DWE01

  3. REMOVE V-BANK COVER


    1. Remove the 2 nuts and cover.

  4. DISCONNECT RADIATOR HOSE OUTLET

  5. REMOVE WATER INLET HOUSING WITH THERMOSTAT


    1. A01J3TD

      Remove the 3 nuts, water inlet housing with thermostat and gasket.