THERMOSTAT REMOVAL

Tech Tips

If the thermostat was not installed, cooling efficiency would be harmed. Even if the engine tends to overheat, do not remove the thermostat.


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. Remove the 4 bolts and under cover.

  2. DRAIN ENGINE COOLANT


    1. Remove the radiator cap.

    2. Loosen the cylinder block drain cock plug and radiator drain cock plug, and then drain the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

      A01J385E01

  3. REMOVE V-BANK COVER


    1. Remove the 2 nuts and cover.

  4. DISCONNECT RADIATOR HOSE OUTLET

  5. REMOVE WATER INLET HOUSING WITH THERMOSTAT


    1. A01J3TD

      Remove the 3 nuts, water inlet housing with thermostat and gasket.