HEATED OXYGEN SENSOR (w/ Secondary Air Injection System) REMOVAL

CAUTION:


  • Wear protective gloves when removing the heated oxygen sensor.

  • The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

  • Confirm that the exhaust pipe assembly has cooled down before removing it.


  1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A01J2YA

      Disconnect the heated oxygen sensor connector.

    2. Detach the sensor wire from the clamp.

    3. A01J7E6E01

      Using SST, remove the heated oxygen sensor.

      SST
      09224-00010