AIR FUEL RATIO SENSOR (w/ Secondary Air Injection System) INSTALLATION


  1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    1. A01J57SE05
      Text in Illustration
      *1 Fulcrum Length

      Using SST, install the air fuel ratio sensor.

      SST
      09224-00010
      Torque:
      for use without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      for use with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips


      • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). When using a torque wrench with a fulcrum length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

    2. Attach the 3 wire harness clamps to the vehicle body.

    3. Connect the air fuel ratio sensor connector.