AIR FUEL RATIO SENSOR (w/ Secondary Air Injection System) REMOVAL

CAUTION:


  • Wear protective gloves when removing the air fuel ratio sensor.

  • The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

  • Confirm that the exhaust pipe assembly has cooled down before removing it.


  1. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    1. A01J3H2

      Disconnect the air fuel ratio sensor connector.

    2. Detach the 3 wire harness clamps.

    3. A01J3NZE03

      Using SST, remove the air fuel ratio sensor.

      SST
      09224-00010