AIR FUEL RATIO SENSOR INSTALLATION


  1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

    A01J30CE02

    1. Using SST, install the sensor to the exhaust manifold.

      SST
      09224-00010
      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf, for use with SST }
      44 N*m  { 449 kgf*cm, 32 ft.*lbf, for use without SST }

      Tech Tips

      Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).

    2. Connect the sensor connector.

  2. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

    A01J6VEE02
    SST
    09224-00010

    1. Using SST, install the sensor to the exhaust manifold.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf, for use with SST }
      44 N*m  { 449 kgf*cm, 32 ft.*lbf, for use without SST }

      Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).

    2. Connect the sensor connector.

  3. INSTALL V-BANK COVER


    1. Install the cover with the 2 nuts.

      Torque:
      7.5 N*m  { 76.5 kgf*cm, 66 in.*lbf }

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.