ECM INSTALLATION


  1. INSTALL NO. 2 ECM BRACKET


    1. A01J6JDE01

      Install the bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 ECM BRACKET


    1. A01J404E01

      Install the bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL ECM


    1. A01J58N

      Install the ECM with the bolt and 2 nuts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

    2. Connect the 4 connectors.

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01J6ZME01
    Text in Illustration
    *1 Stopper

    1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. A01J44JE01
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  6. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.