KNOCK SENSOR INSTALLATION


  1. INSTALL KNOCK SENSOR


    1. A01J5V4E01

      Install the 2 knock sensors with the 2 bolts as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    2. Connect the 2 knock sensor connectors.

  2. INSTALL CYLINDER HEAD SUB-ASSEMBLY


    1. Install the cylinder head Click here.

  3. INSTALL ENGINE ASSEMBLY


    1. Install the engine Click here.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.