CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE V-BANK COVER


    1. A01J56U

      Remove the 2 nuts and V-bank cover.

  3. REMOVE NO. 2 VENTILATION HOSE

    A01J3PA

  4. REMOVE AIR CLEANER ASSEMBLY


    1. A01J6D5

      Disconnect the vacuum hose.

    2. Disconnect the MAF meter connector.

    3. Remove the 2 wire harness clamps.

    4. A01J4E3

      Loosen the 2 hose clamps.

    5. Remove the 2 bolts and air cleaner.

  5. REMOVE THROTTLE BODY


    1. A01J7IS

      Disconnect the throttle position sensor and control motor connector.

    2. Remove the 4 bolts and throttle body.

    3. Remove the gasket from the intake air surge tank.

  6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1)

    A01J4H4

    1. Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.

  7. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2)

    A01J53R

    1. Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.