2TR-FE LUBRICATION TORQUE SPECIFICATIONS

Part tightened N*m kgf*cm ft.*lbf
Oil pressure switch x Cylinder block 15 153 11
Oil filter x Cylinder block 17.2 175 13
Oil drain plug x No. 2 oil pan 37.5 382 28
Oil pump cover x timing chain cover 9.0 92 80 in.*lbf
Oil pump relief valve plug x timing chain cover 49 500 36
Water pump x timing chain cover 13 133 10
timing chain cover plug x timing chain cover 16.6 169 12
Timing chain cover x Cylinder block Excluding the bolts labeled A and C, tighten the bolts and nuts in this order: Area 1, Area 2 and Area 3. 21 214 15
Excluding the bolts labeled A, E and F, tighten the bolts and nuts in this order: Area 1, Area 3, Area 2. for bolt C 26 265 19
for bolt B, D and nut 21 214 15
Tighten the bolts labeled A in this order: Area 2 and Area 3. 60 612 44
Tighten the bolt labeled F. 46 469 34
Tighten the bolts labeled E in Area 4. 21 214 15
No. 1 oil pan x cylinder block 26 265 19
Oil strainer x No. 1 oil pan 20 204 15
No. 2 oil pan x No. 1 oil pan 9.0 92 80 in.*lbf
Crank pulley x crankshaft 260 2651 192
Camshaft position sensor x cylinder head 8.5 87 75 in.*lbf
Cylinder head cover x Cylinder head 9.0 92 80 in.*lbf
No. 1 water by-pass pipe x Timing chain cover 17.5 178 13
No. 1 idler pulley x Timing chain cover 43 438 32
Drive belt tensioner x Timing chain cover Bolt 1 40 408 30
Bolt 2 21 214 15
Bolt 3 43 438 32
Intake manifold x Cylinder head 25 255 18
Ignition coil x Cylinder head cover 9.0 92 80 in.*lbf