IGNITION SWITCH INSTALLATION


  1. INSTALL IGNITION SWITCH ASSEMBLY

    A01J6BB

    1. Install the switch to the steering column bracket upper with the 2 claws.

  2. CONNECT CONNECTOR

    A01J53H

    1. Connect the 9 connectors as shown in the illustration.

    2. Secure the wire harness with the clamps.

  3. INSTALL STEERING COLUMN COVER LOWER

    A01J3TI

    1. Install the cover lower with the 3 screws.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to install the 3 screws and cover lower.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. PERFORM INITIALIZATION

    Perform initialization Click here.

    Note

    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.