IGNITION SWITCH REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE STEERING COLUMN COVER LOWER

    A01J3TI

    1. Remove the 3 screws and cover lower.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to remove the 3 screws and cover lower.

  3. DISCONNECT CONNECTOR

    A01J53H

    1. Disconnect the 9 connectors and wire harness clamps from the steering column.

  4. REMOVE IGNITION SWITCH ASSEMBLY

    A01J6BB

    1. Detach the 2 claws and remove the switch from the steering column bracket upper.