WIPER ECU INSTALLATION

PROCEDURE

1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

   
   

   1. Engage the guide and install the windshield wiper relay with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Replace the bolt with 90168-W0001 bolts to avoid insecure installation.

   2. Connect the connector.

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Tech Tips

   Use the same procedure as for the LHD Click here.