FRONT WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A01V1IVE03
      Text in Illustration
      *a Mark for Blade Position

      Check the automatic stop position.

      Installation position
      Area Measurement
      A 10 mm (0.394 in.)

      1. Operate the windshield wiper motor.

      2. Stop the windshield wiper motor operation.

      3. Check the automatic stop position of the front wiper arm and blade.

        OK
        The front wiper arm and blade stops at the position as shown in the illustration.

        Note

        There are 2 marks, so make sure to inspect using the correct mark.