CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
REMOVE OUTER MIRROR
| *1 | Protective Tape |
| *2 | Moulding Remover |
Push the upper part of the outer mirror surface and tilt it.
Apply protective tape to the bottom of the outer mirror cover.
Using a moulding remover, disengage the 8 claws and remove the outer mirror.
Disconnect the connector.
Tech Tips
If the vehicle is equipped with mirror heater, disconnect the connector.