OUTER REAR VIEW MIRROR INSTALLATION

PROCEDURE

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

   
   

   1. Engage the 3 guides.

   2. Engage the claw and install the outer rear view mirror with the 3 screws.

      Note

      When the outer rear view mirror is reused, do not incline the screws while temporarily tightening them to prevent the screw threads from being damaged.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

   3. Connect the connector.

2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

   Tech Tips

   Use the same procedure as for the RH side Click here.

3. INSTALL FRONT ARMREST BASE UPPER PANEL (w/ Power Window)

   Tech Tips

   Use the same procedure as for the RH side Click here.

4. INSTALL FRONT ARMREST BASE UPPER PANEL (w/o Power Window)

   Tech Tips

   Use the same procedure as for the RH side Click here.

5. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

   Tech Tips

   Use the same procedure as for the RH side Click here.