REAR WIPER RUBBER REPLACEMENT

PROCEDURE


  1. REMOVE REAR WIPER BLADE ASSEMBLY


    1. A01V0Q4

      Raise the wiper blade to the position where the claw disengages with a click sound, as shown in the illustration.

      Note

      Be careful not to damage the claw.

    2. A01V1TT

      Remove the rear wiper blade from the rear wiper arm in the direction indicated by the arrow in the illustration.

      Note

      Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.

  2. REMOVE REAR WIPER RUBBER


    1. A01UZTEE07
      Text in Illustration
      *1 Stopper

      Lift and pull the end of the wiper rubber protrusion from the blade stopper as shown in the illustration.

      Note

      Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.

      Tech Tips

      Lightly pushing the rubber in the middle will allow it to be removed more easily.

    2. A01UYHI

      Remove the rear wiper rubber with the 2 rear wiper rubber backing plates.

    3. Remove the 2 rear wiper rubber backing plates from the rear wiper rubber.

  3. INSTALL REAR WIPER RUBBER


    1. Install the 2 rear wiper rubber backing plates to the rear wiper rubber as shown in the illustration.

      Note

      A01UYR1

      Install the backing plates facing the correct direction.

    2. A01UYAME04
      Text in Illustration
      *1 Second Claws
      *2 Rear End Claws
      *3 Rear End Stopper

      Insert the wiper rubber from the second claws of the wiper blade to the rear end claws.

    3. After pushing the wiper rubber through the rear end claws, allow it to stick out from the rear end stopper.

    4. A01V22TE06
      Text in Illustration
      *1 Front End Claws

      Slide the wiper rubber through the front end claws.

      Note

      Do not deform the rear wiper rubber backing plate or damage the rear wiper blade claws by sliding the rear wiper rubber excessively.

      Tech Tips


      • If the rear wiper blade claws are not through the grooves in the rear wiper rubber, slide the rear wiper rubber back and forth several times to engage the claws.

      • Applying a small amount of washer fluid to the rear wiper rubber allows the claws to align the grooves.

      • A01V00O

        The rear wiper rubber slide stroke is extended by lifting the center of the rear wiper rubber slightly as shown in the illustration.

  4. INSTALL REAR WIPER BLADE ASSEMBLY


    1. A01V1GW

      Engage the claw and install the rear wiper blade to the wiper arm in the illustration.