BACK DOOR REASSEMBLY

PROCEDURE


  1. INSTALL PACKAGE TRAY TRIM HANGER

    Tech Tips

    Use the same procedures for the opposite side.


    1. A004EXZ

      Install the package tray trim hanger.

  2. INSTALL NO. 2 BACK DOOR WIRE


    1. A004FECC02
      *a Hook
      *b Clamp

      Engage the 5 clamps to install the No. 2 back door wire.

    2. Connect the 2 connectors.

    3. Engage the hook.

    4. Install the bolt.

      Torque:
      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }

  3. INSTALL NO. 1 BACK DOOR WIRE


    1. A004EWXC02
      *a Hook
      *b Clamp

      Engage the clamp to install the No. 1 back door wire.

    2. Connect the connector.

    3. Engage the hook.

    4. Install the bolt.

      Torque:
      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }

  4. INSTALL LICENSE PLATE LIGHT ASSEMBLY

    Click here

  5. INSTALL BACK DOOR PANEL CUSHION

    Tech Tips

    Use the same procedures for the opposite side.


    1. A004EEX

      Install a new back door panel cushion.

  6. INSTALL NO. 2 BACK DOOR PANEL PROTECTOR


    1. Clean vehicle installation surface.

    2. Remove the release paper from a new No. 2 back door panel protector.

    3. A004G9VC02
      A004FNG Double-sided Tape

      Engage the 2 clips to install the No. 2 back door panel protector.

    4. Press the double-sided tape area of the No. 2 back door panel protector.

  7. INSTALL NO. 1 BACK DOOR PANEL PROTECTOR

    Tech Tips

    Use the same procedure as for the No. 2 back door panel protector.

  8. INSTALL REAR WASHER NOZZLE

    Click here

  9. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click here

  10. INSTALL REAR LIGHT COVER


    1. A004GAJ

      Engage the 6 claws to install the rear light cover.

  11. INSTALL REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

    Click here

  12. INSTALL REAR SPOILER COVER LH (w/ Rear Spoiler)

    Click here

  13. INSTALL REAR SPOILER COVER RH (w/ Rear Spoiler)

    Tech Tips

    Use the same procedure as for the LH side.

  14. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

    Click here

  15. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  16. INSTALL DOOR UNLOCK SWITCH SUB-ASSEMBLY (w/ Lock Cylinder)


    1. A004EXF

      Engage the 2 claws and install the door unlock switch sub-assembly.

  17. INSTALL BACK DOOR OUTSIDE GARNISH

    Click here

  18. INSTALL REAR LIGHT ASSEMBLY LH


  19. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  20. INSTALL DOOR PULL HANDLE


    1. A004F5Z

      Engage the 4 claws to install the door pull handle.

  21. INSTALL BACK DOOR WEIGHT RETAINER


    1. A004FFP

      Engage the guide to install the back door weight retainer.

    2. Install the 3 bolts.

  22. INSTALL BACK DOOR LOCK ASSEMBLY

    Click here

  23. INSTALL REAR WIPER MOTOR GROMMET

    Click here

  24. INSTALL REAR WIPER MOTOR ASSEMBLY

    Click here

  25. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY

    Click here

  26. INSTALL REAR WIPER ARM HEAD CAP

    Click here

  27. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH


    1. A004ECV

      Engage the 2 guides and 2 claws to install the rear combination light service cover LH.

  28. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  29. INSTALL BACK DOOR TRIM BOARD


    1. A004FIE

      Engage the 11 clips to install the back door trim board.

  30. INSTALL NO. 6 BACK DOOR NAME PLATE

    Click here

  31. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

    Click here