BACK DOOR REASSEMBLY

PROCEDURE


  1. APPLY BODY GREASE

  2. INSTALL NO. 1 BACK DOOR NAME PLATE (w/ Rear Wiper)

    Click here

  3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE (w/ Rear Wiper)

    Click here

  4. INSTALL NO. 6 BACK DOOR NAME PLATE (w/ Rear Wiper)

    Click here

  5. INSTALL SYMBOL EMBLEM

    Click here

  6. INSTALL PACKAGE TRAY TRIM HANGER (w/ Package Tray Trim)


    1. A01UYD6

      Install the package tray trim hanger.

  7. INSTALL BACK DOOR NO. 2 WIRE


    1. A01UYXBE02
      Text in Illustration
      *1 Hook
      *2 Clamp

      Engage the 4 clamps and connect the connector.

    2. Engage the hook and install the wire harness with the bolt.

      Torque:
      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }

  8. INSTALL REAR WINDOW NO. 1 WIRE


    1. A01UXJJE02
      Text in Illustration
      *1 Hook
      *2 Clamp

      Engage the hook and install the bolt.

      Torque:
      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }

    2. Engage the clamp and install the wire harness.

  9. INSTALL LICENSE PLATE LIGHT ASSEMBLY

    Click here

  10. INSTALL BACK DOOR PANEL CUSHION


    1. A01V0K6

      Install a new back door panel cushion.

      Tech Tips

      Use the same procedures for the opposite side.

  11. INSTALL BACK DOOR PANEL NO. 2 PROTECTOR


    1. A01V257E08
      Text in Illustration
      *1 Double-sided Tape

      Using a piece of cloth or similar material, rub off any double-sided tape remaining on the back door panel.

      Note

      Installing the back door panel protector with any double-sided tape remaining on the back door panel may cause adhesion failure. Therefore, completely remove the double-sided tape.

    2. Using a non-residue solvent, clean the attachment surface.

    3. Remove the double-sided tape backing of the new back door panel protector.

    4. Install the back door panel protector with 2 clips.

      Note

      Thoroughly press the back door panel protector to ensure that it adheres.

  12. INSTALL BACK DOOR PANEL NO. 1 PROTECTOR

    Tech Tips

    Use the same procedures as for the No. 2 protector.

  13. INSTALL REAR WASHER NOZZLE

    Click here

  14. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click here

  15. INSTALL REAR LIGHT COVER


    1. A01V1FX

      Engage the 6 claws and install the rear lamp cover.

  16. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  17. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  18. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)

    Click here

  19. INSTALL BACK DOOR GARNISH NO. 2 RETAINER (w/ Cover)


    1. A01V1QK

      Install the back door garnish No. 2 retainer with the 2 nuts.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

  20. INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder)


    1. A01V0HL

      Engage the 2 claws and install the back door lock cylinder.

    2. A01V1LM

      Install the back door lock cylinder with the 2 nuts.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

    3. Connect the connector.

  21. INSTALL DOOR PULL HANDLE


    1. A01UXOG

      Engage the 4 claws and install the door pull handle.

  22. INSTALL BACK DOOR WEIGHT (w/ Back Door Weight)


    1. A01UZ3M

      Engage the hook.

    2. Install the back door weight with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  23. INSTALL BACK DOOR LOCK ASSEMBLY

    Click here

  24. INSTALL GROMMET (w/o Rear Wiper)


    1. A01V16X

      Install the grommet.

  25. INSTALL REAR WIPER MOTOR GROMMET (w/ Rear Wiper)

    Click here

  26. INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)

    Click here

  27. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)

    Click here

  28. INSTALL REAR WIPER ARM HEAD CAP (w/ Rear Wiper)

    Click here

  29. INSTALL BACK DOOR TRIM BOARD


    1. A01UYY2

      Engage the 11 clips and install the back door trim board.

  30. INSTALL REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

    Click here

  31. INSTALL REAR SPOILER COVER LH (w/ Rear Spoiler)

    Click here

  32. INSTALL REAR SPOILER COVER RH (w/ Rear Spoiler)

    Tech Tips

    Use the same procedure as for the LH side.