BACK DOOR INSPECTION

PROCEDURE


  1. INSPECT DOOR UNLOCK SWITCH SUB-ASSEMBLY


    1. A01UXQGE02
      Text in Illustration
      *a

      Component without harness connected

      (Door Unlock Switch Sub-assembly)
      *b UNLOCK
      *c LOCK

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        3 (L) - 4 (E) LOCK 10 kΩ or higher
        OFF Below 1 Ω
        2 (UL) - 4 (E) UNLOCK 10 kΩ or higher
        OFF Below 1 Ω

        If the result is not as specified, replace the door unlock switch.