FUEL LID LOCK CONTROL CABLE ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER


    1. A01V1VEE08
      Text in Illustration
      *1 Claw A
      *2 Claw B
      *3 Slit

      Align the 2 claws B of the fuel filler opening lid lock retainer with the 2 slits.

    2. Push in and install the fuel filler opening lid lock retainer while securely engaging the 2 claws A.

  2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for LHD)


    1. Engage the 4 clamps and install the fuel lid lock control cable as shown in the illustration.

      A01V11NE01
      Text in Illustration
      *1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp
    2. A01UZMG

      Engage the 2 claws and install the fuel lid lock control cable.

  3. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for RHD)


    1. Engage the 7 clamps and install the fuel lid lock control cable as shown in the illustration.

      A01V0GZE01
      Text in Illustration
      *1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp
    2. A01UZMG

      Engage the 2 claws and install the fuel lid lock control cable.

  4. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. Connect the fuel lid lock control cable.

    2. A01UYIZ

      Engage the guide.

    3. Install the fuel lid lock open lever with the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  5. INSTALL FRONT FLOOR CARPET ASSEMBLY


    1. Engage the 6 clamps.

    2. Install the front floor carpet with the 2 clips.

  6. INSTALL NO. 2 FLOOR CARPET HOOK

    Tech Tips

    Use the same procedure for both sides.


    1. A01V1HB

      Insert the hook of the No. 2 floor carpet hook and rotate it 90° in the direction shown by the arrow in the illustration to engage the hook, and install the No. 2 floor carpet hook.

  7. INSTALL JACK ASSEMBLY

  8. INSTALL JACK COVER

  9. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side Click here

  10. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  11. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP


    1. Install the rear door opening trim weatherstrip.

  12. INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side Click here

  13. INSTALL REAR FLOOR FINISH PLATE

    Click here

  14. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  15. INSTALL REAR DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side.

  16. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  17. INSTALL COWL SIDE TRIM BOARD LH

    Tech Tips

    Use the same procedure as for the RH side.

  18. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

  19. INSTALL FRONT DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side.

  20. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here

  21. INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

    Click here

  22. INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

    Click here

  23. INSTALL FRONT FLOOR COVER RH

    Install the front floor cover RH (for Front Floor Cover Type A). Click here

    Install the front floor cover RH (for Front Floor Cover Type B). Click here

  24. INSTALL FRONT FLOOR COVER LH

    Install the front floor cover LH (for Front Floor Cover Type A). Click here

    Install the front floor cover LH (for Front Floor Cover Type B). Click here

  25. INSTALL CENTER FRONT FLOOR COVER (for FrontFloor Cover Type B)

    Click here

  26. INSTALL FRONT SEAT ASSEMBLY

    Click here

  27. INSTALL SPARE WHEEL COVER

    Click here

  28. INSTALL DECK BOARD ASSEMBLY

    Click here