REAR POWER WINDOW SWITCH INSPECTION

PROCEDURE


  1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A01UYGME01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Power Window Regulator Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition

      4(U) - 3(B)

      2(SD) - 1(D)

      		 UP Below 1 Ω

      5(SU) - 4(U)

      2(SD) - 1(D)

      		 OFF Below 1 Ω

      5(SU) - 4(U)

      3(B) - 1(D)

      		 DOWN Below 1 Ω

      If the result is not as specified, replace the rear power window regulator switch assembly.