RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT DEFOGGER RELAY


    1. A01V0QL

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Battery voltage not applied Below 1 Ω
      Battery voltage applied to terminal 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage not applied 10 kΩ or higher
      Battery voltage applied to terminal 1 and 2 Below 1 Ω

      If the result is not as specified, replace the relay.