LOWER INSTRUMENT PANEL INSTALLATION

PROCEDURE

INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
1. Text in Illustration
  
  *a Runner Portion
  
  *b Cut Off
  
  Using a nipper, cut off both ends of the runner portion shown in the illustration (When installing a new one).
2. Engage the 10 guides to install the lower instrument panel sub-assembly.
3. Install the lower instrument panel sub-assembly with the 6 <B> or <C> bolts, <D> or <E> screw and 2 <F> bolts.
  
  *1 <B> or <C>
  
  *2 <D> or <E>
4. Connect the connectors.
5. Engage the clamps.
6. Engage the 2 claws to install the DLC3 connector.
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
1. Engage the 2 guides and claw to install the hood lock control lever sub-assembly.
INSTALL REAR CONSOLE BOX ASSEMBLY

Click here
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Click here
INSTALL CIGARETTE LIGHTER BEZEL STAY (w/ Cigarette Lighter)

Click here
INSTALL CIGARETTE LIGHTER ASSEMBLY (w/ Cigarette Lighter)

Click here
INSTALL NO. 1 POWER OUTLET SOCKET COVER (w/ Power Outlet Socket)

Click here
INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY (w/ Power Outlet Socket)

Click here
INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY (w/o Cover)

Click here
INSTALL SPARE SWITCH HOLE COVER (w/ Cover)
1. Engage the 2 claws to install the spare switch hole cover.
INSTALL STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)
1. Align the 2 holes in the radio bracket with the 2 bosses of the lower instrument panel sub-assembly.
2. Install the stereo opening cover with bracket with the 4 screws.
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

Click here
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)
1. for LHD:
  1. Engage the 5 claws and 2 clips and install the instrument panel finish panel.
2. for RHD:
  1. Engage the 6 claws and 2 clips and install the instrument panel finish panel.
INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

Click here
INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
1. for LHD:
  1. w/o Pre-crash Safety System:
    1. Engage the guide, 2 claws and 5 clips to install the No. 2 instrument panel finish panel.
  2. w/ Pre-crash Safety System:
    1. Connect the connectors.
    2. Engage the 2 claws and 6 clips to install the No. 2 instrument panel finish panel.
2. for RHD:
  1. w/ Pre-crash Safety System:
    1. Connect the connectors.
  2. Engage the 2 claws and 6 clips to install the No. 2 instrument panel finish panel.
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
1. w/ Footwell Light:
  1. Connect the connector.
2. Engage the guide and 2 claws.
3. Install the instrument panel under cover sub-assembly with the 2 <A> screws.
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
1. w/ Footwell Light:
  1. Connect the connector.
2. Engage the guide and the 3 claws and install the instrument panel under cover sub-assembly.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
1. Text in Illustration
  
  *a Hinge
  
  *b Guide
  
  Engage the 3 guides and 2 hinges in the horizontal direction to install the glove compartment door assembly.
  
  Note
  
  Engage the 2 hinges in the horizontal direction, otherwise, installation failure caused by excessive play around the hinges will result.
2. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
3. Engage the claw and connect the glove compartment door stopper sub-assembly.
INSTALL COWL SIDE TRIM BOARD RH

Click here
INSTALL COWL SIDE TRIM BOARD LH

Tech Tips

Use the same procedure as for the RH side.
INSTALL FRONT DOOR SCUFF PLATE RH

Click here
INSTALL FRONT DOOR SCUFF PLATE LH

Tech Tips

Use the same procedure as for the RH side.
INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Click here

Text in Illustration
*a	Runner Portion
*b	Cut Off

*1	<B> or <C>
*2	<D> or <E>

Text in Illustration
*a	Hinge
*b	Guide