LOWER INSTRUMENT PANEL INSTALLATION

PROCEDURE

1. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a	Runner Portion
      *b	Cut Off

      Using a nipper, cut off both ends of the runner portion shown in the illustration (When installing a new one).

   2. Engage the 10 guides and install the lower instrument panel.

   3. Install the lower instrument panel with the 6 <B> or <C> bolts, <D> or <E> screw, 2 <F> bolts and bolt.

      

      *1	<B> or <C>
      *2	<D> or <E>

   4. Connect the clamps and connectors.

   5. Engage the 2 claws and install the DLC3 connector.

2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   
   

   1. Engage the 3 claws and install the hood lock control lever.

3. INSTALL REAR CONSOLE BOX

   Click here

4. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for LHD)

   Click here

5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for RHD)

   Click here

6. INSTALL STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)

   
   

   1. 

      Align the 2 holes in the radio bracket with the 2 bosses of the instrument panel.

   2. Install the radio stereo opening cover with bracket with the 4 screws.

7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

   Click here

8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)

   
   

   1. for LHD:

      
      

      1. Engage the 5 claws and 2 clips and install the instrument panel finish panel.

   2. for RHD:

      
      

      1. Engage the 6 claws and 2 clips and install the instrument panel finish panel.

9. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

   Click here

10. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    
    

    1. Engage the 2 claws and 5 clips and install the instrument panel finish panel.

11. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    
    

    1. w/ Footwell Light:

       
       

       1. Connect the connector.

    2. Engage the guide and the claw.

    3. Install the instrument panel under cover with the 2 <A> screws.

12. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    
    

    1. w/ Footwell Light:

       
       

       1. Connect the connector.

    2. Engage the guide and the 3 claws and install the instrument panel under cover.

13. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    
    

    1. 

       Text in Illustration

       *1	Hinge
       *2	Guide

       Engage the 3 guides and 2 hinges in the horizontal direction to install the glove compartment door.

       Note

       Engage the 2 hinges in the horizontal direction, otherwise, installation failure caused by excessive play around the hinges will result.

    2. 

       While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

    3. Engage the claw and connect the glove compartment door stopper.

14. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here