LOWER INSTRUMENT PANEL REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

All bolts, screws and nuts relevant to installing and removing the instrument panel are shown, along with their alphabetic codes, in the table below.

A01UYNTE01

PROCEDURE


  1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    1. A01UYK1

      Disengage the claw and separate the glove compartment door stoppers from the glove compartment door.

    2. Slightly flex the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    3. A01UZ14E01
      Text in Illustration
      *1 Hinge
      *2 Guide

      Pull the glove compartment door out horizontally to disengage the 2 hinges and 3 guides and remove the glove compartment door.

      Note

      Pull the glove compartment door out horizontally. Otherwise, the hinge may be damaged, making re-installation impossible.

  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01UZ9H

      Disengage the 3 claws and the guide and remove the instrument panel under cover.

    2. w/ Footwell Light:


      1. Disconnect the connector.

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01V255

      Remove the 2 <A> screws.

    2. Disengage the claw and the guide and remove the instrument panel under cover.

    3. w/ Footwell Light:


      1. Disconnect the connector.

  5. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)


    1. A01V00B

      Disengage the 5 clips and the 2 claws and remove the instrument panel finish panel.

  6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)


    1. for LHD:


      1. A01V06X

        Disengage the 2 clips and the 5 claws and remove the instrument panel finish panel.

    2. for RHD:


      1. A01UYA4

        Disengage the 2 clips and the 6 claws and remove the instrument panel finish panel.

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

    Click here

  8. REMOVE STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. A01V1SR

      Remove the 4 screws and the stereo opening cover with bracket.

  9. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

    Click here

  10. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for LHD)

    Click here

  11. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for RHD)

    Click here

  12. REMOVE REAR CONSOLE BOX

    Click here

  13. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01V021

      Disengage the 3 claws and separate the hood lock control lever.

  14. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A01UYY4

      Disengage the 2 claws and disconnect the DLC3 connector.

    2. Disconnect the clamps and connectors.

    3. Remove the 6 <B> or <C> bolts, <D> or <E> screw, 2 <F> bolts, and bolt from the lower instrument panel.

      A01V1HXE06
      *1 <B> or <C>
      *2 <D> or <E>

    4. Disengage the 10 guides and remove the lower instrument panel.

      A01V0A4