CONDENSER REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  3. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE FRONT AIRBAG SENSOR

    Click here

  5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A004FSI

      Remove the bolt to disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  6. DISCONNECT LIQUID TUBE SUB-ASSEMBLY A


    1. A004G43

      Remove the bolt to disconnect the liquid tube sub-assembly A from the cooler condenser assembly.

    2. Remove the O-ring from the liquid tube sub-assembly A.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.

  7. REMOVE RADIATOR UPPER SUPPORT SUB-ASSEMBLY


    1. A004FMG

      Disconnect the connector.

    2. A004ELO

      Disengage the 2 clamps and separate the wire harness.

    3. A004FAD

      Disengage the 2 clamps to disconnect the hood lock control cable sub-assembly.

    4. A004F9F

      Remove the 4 bolts and radiator upper support sub-assembly.

  8. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH

    Click here

  9. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. REMOVE NO. 2 FAN SHROUD


    1. A004FA6

      Remove the 2 bolts.

    2. Disengage the 2 claws and remove the No. 2 fan shroud.

  11. REMOVE COOLER CONDENSER ASSEMBLY


    1. A004FH0

      Disengage the 2 guides and remove the cooler condenser assembly.

      Note

      Do not damage the cooler condenser assembly or radiator assembly when removing the cooler condenser assembly.