ROOM TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  2. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/ Radio Receiver)

    Click here

  3. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/o Radio Receiver)

    Click here

  4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for LHD)

    Click here

  6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for RHD)

    Click here

  7. REMOVE ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)


    1. A01V0CZE05
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and room temperature sensor (cooler thermistor).