REAR SEAT INNER BELT ASSEMBLY(for RH Side) INSTALLATION

PROCEDURE


  1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH


    1. A01V17NE03
      Text in Illustration
      *a Convex
      *b Arrow Mark

      Install the rear seat inner with center belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the anchor plate with the arrow mark facing forward.

      • Do not place the anchor plate over the convex area of the floor panel.

    2. Connect the connector.

  2. INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY

    Click here